Posts

image4

The future of slip testing

Slip testing standards differ from one country to another, but there are certain standards that seem to be congruous to all affected countries. Slip testing is mainly done on flooring and flooring products, under various types of conditions. However, some industry insiders think that more needs to be done to increase safety against slip accidents especially at work.

The hospital industry, for example, has insisted that all workers wear a special kind of shoe that is resistant to slips, even if there are spills on the floor. What of the restaurant industry, and others? Slip testing officials feel that there is need for standardization of workplace footwear, to reduce slip and fall accidents especially amongst employees.

Other issues arise such as standardization of the quality of the flooring materials across all countries. Although this may be a bit embellished, they do raise an important issue. Imported flooring material should be properly tested according to the standards of the destination country. If it is tested to lower standards, then slip and fall accidents may happen when the new building is put up and used for a while.

The standards of the slip resistance test are governed by the resident country, but there should be an international standard that should be adhered to by all nations that are signatory to such a standard or organization.

This may be a big ask at the moment, but it is important that all slip resistance experts do see a way of standardizing slip resistance test requirements.

Today, most will use other materials to make up for any differences in these standards. Some will insist that imported floors are subjected to treatments to improve the friction, or certain mates are placed on the floors to stop slippage. This is an extra cost to the owner of the building, and if the floors were imported to certain international standards, such costs would not be necessary.

The whole issue of a global slip resistance test standard may seem like a fairy tale, but probably all international organizations started off in the same way. It just requires that the experts and public do their due diligence and come up with standards that are equal all over the world.

If you are a slip resistance testing expert, then this is something that you should mull over, even as you go about your work. Discuss it with other experts and see if there is a way to start such an organization. Petition the government and national standards body and ask for deliberations to be made for international standards that are similar all over the world.

If you are a member of the public, do give your input and see how much your opinion matters. If you want more information on slip resistance test standards, kindly do give us a call, and our team will be ready to explain them to you, and why they are very important to public health and safety.

Pendulum UK

Understanding slip resistance test

People have heard of slip resistance testing, but they know very little about it. Many just know that it is a test that is done to check how slippery a floor is, but do they really know why this test is so important? Here you will get a better understanding of what slip resistance testing is and why it is very important.

Simply put

IN simple terms, slip resistance testing is the science of testing the coefficient of friction, or the resistance to slippage. The test is done on floors in various environments. Testing can be done in the lab or can be done on site.

Why it is important

This is a test that is important to people who own or manage buildings, especially if there has been an incident of a fall, or a near-fall. The owners are liable if the floor is found to be slippery and face litigation costs that can be astronomically high.

The other reason why a test is desired is because the falls can cause permanent damage to the victim. Compensation or no compensation, it is important that everyone who comes into a premise is safe at all times, so the owners have to make sure that their floors are safe at all times.

Methods of slip resistance testing

  • There are several methods of undertaking slip resistance testing and the most preferred are those that are done at the site. This is because they represent the real factors that affect the floor at that time. The Tortus test is used to test the floor when dry and involves the use of a slow machine with a rubber bottom which measures the friction of the dry floor.
  • The wet Pendulum test is used to test the floor when wet, where water is sprayed on a floor and the pendulum shoved across the floor. The boot will move the pendulum and give a reading on the friction of the floor.
  • The two methods above are done on the site, but there are also lab tests which are used to test flooring materials before they are installed. These are not very common to the public, since they are carried out mainly in the production phase of the design and manufacture of the flooring material. Nevertheless, the lab tests are also very important.

Knowing how to choose a slip resistance testing company is just as important as knowing what slip resistance is all about. The company you choose must be accredited by an accreditation organization. This will prove that they have met all national and government standards when it comes to testing floors for slipperiness.

You need to know about slip testing, its importance and also how to get a company that will do the job, and do it right. Call us now and we shall be happy to give you more information on slip resistance testing, its importance and then let us do the test for you.

How Damages are Assessed in Slip and Trip accident

How Damages Are Assessed In Slip And Trip Accident Cases

When lawyers get a slip, trip and fall (personal injury case), after reviewing the treatment reports of the plaintiff, they study the similar case and case verdicts.

Usually when a claim is raised due to negligence in maintenance or non availability of anti slip ratings obtained via of the pendulum slip resistance test in London, it calls for a massive compensation on part of the management.

Personal injury compensation is a package that comprises of reimbursement of various real expenses and many intangible circumstances.. Read more

What happens in Case of Slip and trip accidents

What happens in Case of Slip and trip accidents?

Slip testing in London is a legal norm that must be conducted on annual basis. The test is conducted using British pendulum tester by the independent slip testing services based in London. Kindly, take a note that independent slip testing services London must be a part of the UK slip resistance group. The Pendulum Test Value (PTV) received from pendulum slip test equipment must be 36 or above for you to be safe.. Read more